img
/
/
/
Investment analysis of industrial valve industry

Investment analysis of industrial valve industry

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2021-11-15 09:50
  • Views:

(Summary description)The global industrial valve market is mainly concentrated in countries and regions with relatively developed economy and industry. According to the analysis data of industrial valve industry, the 10 most important industrial valve consumers in the world in 2019 are the United States, China, Japan, Russia, Germany, India, Brazil, Saudi Arabia, France and South Korea. Among them, the top three valve markets in the United States, China and Japan are US $8.848 billion, US $7.346 billion and US $2791 billion respectively. The investment analysis of industrial valve industry points out that China's industrial valves are mainly used to adjust the process parameters such as medium flow, pressure, temperature and liquid level in the field of industrial automation process control. In 2019, China's industrial valve demand structure changed greatly, and the proportion of chemical industry and papermaking increased most significantly. The demand for oil and gas is relatively low, but the proportion is increasing, from 8.52% in 2012 to 14.70% in 2017. By December 2019, the market scale of China's industrial valve industry has reached 210.942 billion yuan. From the market level, most domestic valve enterprises are in the low-end market of the valve industry. The valve products in the low-end market have strong universality, low technical content, low entry threshold, many industry enterprises, high competition in the industry as a whole, and low market concentration. With the increasing number of new entrants in the industry, the competition will be more intense, and the profit level of the low-end valve market will also decline.

Investment analysis of industrial valve industry

(Summary description)The global industrial valve market is mainly concentrated in countries and regions with relatively developed economy and industry. According to the analysis data of industrial valve industry, the 10 most important industrial valve consumers in the world in 2019 are the United States, China, Japan, Russia, Germany, India, Brazil, Saudi Arabia, France and South Korea. Among them, the top three valve markets in the United States, China and Japan are US $8.848 billion, US $7.346 billion and US $2791 billion respectively.

The investment analysis of industrial valve industry points out that China's industrial valves are mainly used to adjust the process parameters such as medium flow, pressure, temperature and liquid level in the field of industrial automation process control. In 2019, China's industrial valve demand structure changed greatly, and the proportion of chemical industry and papermaking increased most significantly. The demand for oil and gas is relatively low, but the proportion is increasing, from 8.52% in 2012 to 14.70% in 2017.

By December 2019, the market scale of China's industrial valve industry has reached 210.942 billion yuan. From the market level, most domestic valve enterprises are in the low-end market of the valve industry. The valve products in the low-end market have strong universality, low technical content, low entry threshold, many industry enterprises, high competition in the industry as a whole, and low market concentration. With the increasing number of new entrants in the industry, the competition will be more intense, and the profit level of the low-end valve market will also decline.


  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2021-11-15 09:50
  • Views:
Information

The global industrial valve market is mainly concentrated in countries and regions with relatively developed economy and industry. According to the analysis data of industrial valve industry, the 10 most important industrial valve consumers in the world in 2019 are the United States, China, Japan, Russia, Germany, India, Brazil, Saudi Arabia, France and South Korea. Among them, the top three valve markets in the United States, China and Japan are US $8.848 billion, US $7.346 billion and US $2791 billion respectively.

The investment analysis of industrial valve industry points out that China's industrial valves are mainly used to adjust the process parameters such as medium flow, pressure, temperature and liquid level in the field of industrial automation process control. In 2019, China's industrial valve demand structure changed greatly, and the proportion of chemical industry and papermaking increased most significantly. The demand for oil and gas is relatively low, but the proportion is increasing, from 8.52% in 2012 to 14.70% in 2017.

By December 2019, the market scale of China's industrial valve industry has reached 210.942 billion yuan. From the market level, most domestic valve enterprises are in the low-end market of the valve industry. The valve products in the low-end market have strong universality, low technical content, low entry threshold, many industry enterprises, high competition in the industry as a whole, and low market concentration. With the increasing number of new entrants in the industry, the competition will be more intense, and the profit level of the low-end valve market will also decline.

相关资讯

Where is the ball valve applicable
Where
The ball valve has been washed by materials for a long time, resulting in friction, resulting in serious impact wear, which can not meet the normal production, and shorten the service life of the equipment. At present, wear-resistant materials, such as ceramic materials and polymer composites, are mostly used for ball valve wear, and meijiahua technology system is widely used. Polymer materials have superior adhesion and super wear resistance, which can safely solve the disadvantages of frequent wear of metals and ensure the normal production of enterprise equipment. Moreover, the unique ceramic materials and special surface enhancers in the materials make their wear resistance and physical impact resistance superior to any steel or even more than ceramic tiles in the worst dry grinding environment. The incompatibility between products and coal is an ideal material to prevent coal accumulation.

See more information
The ball valve has been washed by materials for a long time, resulting in friction, resulting in serious impact wear, which can not meet the normal production, and shorten the service life of the equipment. At present, wear-resistant materials, such as ceramic materials and polymer composites, are mostly used for ball valve wear, and meijiahua technology system is widely used. Polymer materials have superior adhesion and super wear resistance, which can safely solve the disadvantages of frequent wear of metals and ensure the normal production of enterprise equipment. Moreover, the unique ceramic materials and special surface enhancers in the materials make their wear resistance and physical impact resistance superior to any steel or even more than ceramic tiles in the worst dry grinding environment. The incompatibility between products and coal is an ideal material to prevent coal accumulation.

Development history of valve electric device industry in China
Development
Before 1965, China had no valve electric device products, let alone professional manufacturers. At that time, China's main valve users: electric power, petroleum, chemical industry, metallurgy, water supply and drainage and other industries. Due to the small scale of enterprises, low operating parameters and low automation level, most of them used manual valves, so only some large factories such as Liaoning Tieling valve factory, Shenyang high and medium pressure valve factory, Shanghai Valve Factory and Harbin boiler factory produced large valves, It is equipped with a simple device for opening and closing the valve driven by an ordinary motor to drive the worm gear box, so as to solve the difficulty that the valve cannot be pulled by manpower.

  In the field of valve use, in order to open and close the large valve, people tied a long lever on the handwheel, which was lined up by several or more young men to push the valve to open or close like a push mill.

    In October 1964, with the development of China's national economy, valve users continued to develop in the direction of high parameters, large-scale and automation. They had higher and higher requirements for valve product varieties, specifications, parameters and automation level, and the demand was increasing day by day. In this situation, in order to meet the needs of the development of China's valve industry, the first machinery department decided to establish a valve research office in the general machinery industry centralized Institute - General Machinery Research Institute to uniformly plan, design and study the development of China's valve industry.

    After the establishment of the valve research office of the General Institute, it attached great importance to the research and development of valve electric device products. In January 1965, the valve Office of the General Institute appointed comrades Hong Miancheng and Li Wangshun to Tianjin for investigation and research, and decided to designate Tianjin No. 2 general machinery factory, which originally produced small autoclaves, as the first professional manufacturer of valve electric device in China. At the same time, it was decided to establish a joint design group for valve electric devices to carry out design work in Tianjin (History: joint design of valve electric devices for * * times in China). The joint design team is headed by Li Wangshun of General Machinery Research Institute, attended by Xu Yuxia and Yao Dingxiang of Beijing Design Institute of Ministry of chemical industry, Zhu Xiaoxian of Beijing Design Institute of Ministry of petroleum, Zhao Zhende of Fushun Design Institute of Ministry of petroleum, Xiang Meigen of General Machinery Research Institute, etc.

    In the first half of 1965, the joint design group designed and completed the design task of valve electric device of type B, type C and type D with maximum operating torque of 1200nm. In December 1965, Tianjin No. 2 general machinery factory completed the trial production of valve electric devices of these three models.
See more information
Before 1965, China had no valve electric device products, let alone professional manufacturers. At that time, China's main valve users: electric power, petroleum, chemical industry, metallurgy, water supply and drainage and other industries. Due to the small scale of enterprises, low operating parameters and low automation level, most of them used manual valves, so only some large factories such as Liaoning Tieling valve factory, Shenyang high and medium pressure valve factory, Shanghai Valve Factory and Harbin boiler factory produced large valves, It is equipped with a simple device for opening and closing the valve driven by an ordinary motor to drive the worm gear box, so as to solve the difficulty that the valve cannot be pulled by manpower.

  In the field of valve use, in order to open and close the large valve, people tied a long lever on the handwheel, which was lined up by several or more young men to push the valve to open or close like a push mill.

    In October 1964, with the development of China's national economy, valve users continued to develop in the direction of high parameters, large-scale and automation. They had higher and higher requirements for valve product varieties, specifications, parameters and automation level, and the demand was increasing day by day. In this situation, in order to meet the needs of the development of China's valve industry, the first machinery department decided to establish a valve research office in the general machinery industry centralized Institute - General Machinery Research Institute to uniformly plan, design and study the development of China's valve industry.

    After the establishment of the valve research office of the General Institute, it attached great importance to the research and development of valve electric device products. In January 1965, the valve Office of the General Institute appointed comrades Hong Miancheng and Li Wangshun to Tianjin for investigation and research, and decided to designate Tianjin No. 2 general machinery factory, which originally produced small autoclaves, as the first professional manufacturer of valve electric device in China. At the same time, it was decided to establish a joint design group for valve electric devices to carry out design work in Tianjin (History: joint design of valve electric devices for * * times in China). The joint design team is headed by Li Wangshun of General Machinery Research Institute, attended by Xu Yuxia and Yao Dingxiang of Beijing Design Institute of Ministry of chemical industry, Zhu Xiaoxian of Beijing Design Institute of Ministry of petroleum, Zhao Zhende of Fushun Design Institute of Ministry of petroleum, Xiang Meigen of General Machinery Research Institute, etc.

    In the first half of 1965, the joint design group designed and completed the design task of valve electric device of type B, type C and type D with maximum operating torque of 1200nm. In December 1965, Tianjin No. 2 general machinery factory completed the trial production of valve electric devices of these three models.
搜索
确认
取消

CONTACT INFORMATION

Tel:0411-86734112
Tel:0411-86735038
Tel:0411-86735010
Fax:0411-86735468

Miss Han and Miss Song:18098804580
Email:xiangrui@dl-xiangrui.com

Address: No. 12, Xinfeng street, Ganjingzi District, Dalian, Liaoning

ONLINE MESSAGE

Username used for comment:
客户留言
Description:
验证码

Copyright:Dalian Xiangrui Valve Manufacturing Co.,Ltd.    辽ICP备2022001592号    Powerby:300.cn dalian