img
/
/
Company news
Where is the ball valve applicable
Where
The ball valve has been washed by materials for a long time, resulting in friction, resulting in serious impact wear, which can not meet the normal production, and shorten the service life of the equipment. At present, wear-resistant materials, such as ceramic materials and polymer composites, are mostly used for ball valve wear, and meijiahua technology system is widely used. Polymer materials have superior adhesion and super wear resistance, which can safely solve the disadvantages of frequent wear of metals and ensure the normal production of enterprise equipment. Moreover, the unique ceramic materials and special surface enhancers in the materials make their wear resistance and physical impact resistance superior to any steel or even more than ceramic tiles in the worst dry grinding environment. The incompatibility between products and coal is an ideal material to prevent coal accumulation.

See more information
The ball valve has been washed by materials for a long time, resulting in friction, resulting in serious impact wear, which can not meet the normal production, and shorten the service life of the equipment. At present, wear-resistant materials, such as ceramic materials and polymer composites, are mostly used for ball valve wear, and meijiahua technology system is widely used. Polymer materials have superior adhesion and super wear resistance, which can safely solve the disadvantages of frequent wear of metals and ensure the normal production of enterprise equipment. Moreover, the unique ceramic materials and special surface enhancers in the materials make their wear resistance and physical impact resistance superior to any steel or even more than ceramic tiles in the worst dry grinding environment. The incompatibility between products and coal is an ideal material to prevent coal accumulation.

Development history of valve electric device industry in China
Development
Before 1965, China had no valve electric device products, let alone professional manufacturers. At that time, China's main valve users: electric power, petroleum, chemical industry, metallurgy, water supply and drainage and other industries. Due to the small scale of enterprises, low operating parameters and low automation level, most of them used manual valves, so only some large factories such as Liaoning Tieling valve factory, Shenyang high and medium pressure valve factory, Shanghai Valve Factory and Harbin boiler factory produced large valves, It is equipped with a simple device for opening and closing the valve driven by an ordinary motor to drive the worm gear box, so as to solve the difficulty that the valve cannot be pulled by manpower.

  In the field of valve use, in order to open and close the large valve, people tied a long lever on the handwheel, which was lined up by several or more young men to push the valve to open or close like a push mill.

    In October 1964, with the development of China's national economy, valve users continued to develop in the direction of high parameters, large-scale and automation. They had higher and higher requirements for valve product varieties, specifications, parameters and automation level, and the demand was increasing day by day. In this situation, in order to meet the needs of the development of China's valve industry, the first machinery department decided to establish a valve research office in the general machinery industry centralized Institute - General Machinery Research Institute to uniformly plan, design and study the development of China's valve industry.

    After the establishment of the valve research office of the General Institute, it attached great importance to the research and development of valve electric device products. In January 1965, the valve Office of the General Institute appointed comrades Hong Miancheng and Li Wangshun to Tianjin for investigation and research, and decided to designate Tianjin No. 2 general machinery factory, which originally produced small autoclaves, as the first professional manufacturer of valve electric device in China. At the same time, it was decided to establish a joint design group for valve electric devices to carry out design work in Tianjin (History: joint design of valve electric devices for * * times in China). The joint design team is headed by Li Wangshun of General Machinery Research Institute, attended by Xu Yuxia and Yao Dingxiang of Beijing Design Institute of Ministry of chemical industry, Zhu Xiaoxian of Beijing Design Institute of Ministry of petroleum, Zhao Zhende of Fushun Design Institute of Ministry of petroleum, Xiang Meigen of General Machinery Research Institute, etc.

    In the first half of 1965, the joint design group designed and completed the design task of valve electric device of type B, type C and type D with maximum operating torque of 1200nm. In December 1965, Tianjin No. 2 general machinery factory completed the trial production of valve electric devices of these three models.
See more information
Before 1965, China had no valve electric device products, let alone professional manufacturers. At that time, China's main valve users: electric power, petroleum, chemical industry, metallurgy, water supply and drainage and other industries. Due to the small scale of enterprises, low operating parameters and low automation level, most of them used manual valves, so only some large factories such as Liaoning Tieling valve factory, Shenyang high and medium pressure valve factory, Shanghai Valve Factory and Harbin boiler factory produced large valves, It is equipped with a simple device for opening and closing the valve driven by an ordinary motor to drive the worm gear box, so as to solve the difficulty that the valve cannot be pulled by manpower.

  In the field of valve use, in order to open and close the large valve, people tied a long lever on the handwheel, which was lined up by several or more young men to push the valve to open or close like a push mill.

    In October 1964, with the development of China's national economy, valve users continued to develop in the direction of high parameters, large-scale and automation. They had higher and higher requirements for valve product varieties, specifications, parameters and automation level, and the demand was increasing day by day. In this situation, in order to meet the needs of the development of China's valve industry, the first machinery department decided to establish a valve research office in the general machinery industry centralized Institute - General Machinery Research Institute to uniformly plan, design and study the development of China's valve industry.

    After the establishment of the valve research office of the General Institute, it attached great importance to the research and development of valve electric device products. In January 1965, the valve Office of the General Institute appointed comrades Hong Miancheng and Li Wangshun to Tianjin for investigation and research, and decided to designate Tianjin No. 2 general machinery factory, which originally produced small autoclaves, as the first professional manufacturer of valve electric device in China. At the same time, it was decided to establish a joint design group for valve electric devices to carry out design work in Tianjin (History: joint design of valve electric devices for * * times in China). The joint design team is headed by Li Wangshun of General Machinery Research Institute, attended by Xu Yuxia and Yao Dingxiang of Beijing Design Institute of Ministry of chemical industry, Zhu Xiaoxian of Beijing Design Institute of Ministry of petroleum, Zhao Zhende of Fushun Design Institute of Ministry of petroleum, Xiang Meigen of General Machinery Research Institute, etc.

    In the first half of 1965, the joint design group designed and completed the design task of valve electric device of type B, type C and type D with maximum operating torque of 1200nm. In December 1965, Tianjin No. 2 general machinery factory completed the trial production of valve electric devices of these three models.
Market growth trend, covid-19 impact and future expectation of control valve market from 2021 to 2026
Market
The competition in the control valve market is relatively moderate, with several major enterprises participating in it. With the increasing demand for control valves, many new enterprises are also developing customers in emerging economies and trying to improve their market share.

     Control valves can be subdivided into markets according to valve design types (stop valve, ball valve, butterfly valve, angle valve, diaphragm valve, others), end-user industries (oil and gas, chemical industry, energy and power, pharmaceutical, food and beverage, other end-user industries) and regions.

     Market Overview

     In 2020, the market scale of control valve will be US $10.12 billion, which is expected to reach US $12.19 billion by 2026, with a CAGR of 3.67% during the reporting period from 2021 to 2026. During the period, investment in pipeline and infrastructure development is expected to stimulate the market demand for control valves.

     Major industries such as oil and gas and pharmaceutical are developing towards valve technology with embedded processor and internet capability, so as to complete the collaborative work of complex monitoring technology through the coordination of central control station.

     In addition, due to the rapid growth of the number of solar power plants, the promotion of renewable energy projects has expanded the application field of control valves.

     The expansion of power infrastructure and the supply of natural gas in the United States are also expected to lead to the construction of several new combined cycle gas turbine (CCGT) plants, and promote the demand for control valves during the reporting period.

     Report scope

     The control valve controls the flowing fluid, such as gas, steam, water or compound, to compensate for the load disturbance and make the variables generated by the regulation process as close as possible to the required set value. Control valves are the most important part of any process control circuit, because they are very important to the overall performance of the process, especially in the process flow with the main goal of achieving reliability and productivity.

     By terminal application industry:

     Control valves can be divided into oil and gas, chemicals, energy and power, pharmaceutical, food and beverage and other end-user industries.

     By Region:

     North America (USA, Canada), Europe (UK, Germany, France, Italy, other European countries and regions), Asia Pacific (China, Japan, South Korea, India, other Asian countries and regions), Latin America (Mexico, other Latin American countries and regions), the Middle East and Africa.


See more information
The competition in the control valve market is relatively moderate, with several major enterprises participating in it. With the increasing demand for control valves, many new enterprises are also developing customers in emerging economies and trying to improve their market share.

     Control valves can be subdivided into markets according to valve design types (stop valve, ball valve, butterfly valve, angle valve, diaphragm valve, others), end-user industries (oil and gas, chemical industry, energy and power, pharmaceutical, food and beverage, other end-user industries) and regions.

     Market Overview

     In 2020, the market scale of control valve will be US $10.12 billion, which is expected to reach US $12.19 billion by 2026, with a CAGR of 3.67% during the reporting period from 2021 to 2026. During the period, investment in pipeline and infrastructure development is expected to stimulate the market demand for control valves.

     Major industries such as oil and gas and pharmaceutical are developing towards valve technology with embedded processor and internet capability, so as to complete the collaborative work of complex monitoring technology through the coordination of central control station.

     In addition, due to the rapid growth of the number of solar power plants, the promotion of renewable energy projects has expanded the application field of control valves.

     The expansion of power infrastructure and the supply of natural gas in the United States are also expected to lead to the construction of several new combined cycle gas turbine (CCGT) plants, and promote the demand for control valves during the reporting period.

     Report scope

     The control valve controls the flowing fluid, such as gas, steam, water or compound, to compensate for the load disturbance and make the variables generated by the regulation process as close as possible to the required set value. Control valves are the most important part of any process control circuit, because they are very important to the overall performance of the process, especially in the process flow with the main goal of achieving reliability and productivity.

     By terminal application industry:

     Control valves can be divided into oil and gas, chemicals, energy and power, pharmaceutical, food and beverage and other end-user industries.

     By Region:

     North America (USA, Canada), Europe (UK, Germany, France, Italy, other European countries and regions), Asia Pacific (China, Japan, South Korea, India, other Asian countries and regions), Latin America (Mexico, other Latin American countries and regions), the Middle East and Africa.


Previous page
1
2
4
搜索
确认
取消

CONTACT INFORMATION

Tel:0411-86734112
Tel:0411-86735038
Tel:0411-86735010
Fax:0411-86735468

Miss Han and Miss Song:18098804580
Email:xiangrui@dl-xiangrui.com

Address: No. 12, Xinfeng street, Ganjingzi District, Dalian, Liaoning

ONLINE MESSAGE

Username used for comment:
客户留言
Description:
验证码

Copyright:Dalian Xiangrui Valve Manufacturing Co.,Ltd.    辽ICP备2022001592号    Powerby:300.cn dalian